The Chevrolet Corvette C8 was not only the Corvette’s first mid-engine generation; it was also the first sold exclusively with a dual-clutch automatic. The report says the cost of developing two transaxles—one manual and one automatic—for the mid-engine layout was a factor in Chevrolet’s decision to concentrate on the dual-clutch path. The result was a highly capable car, but one that left some enthusiasts wishing for a third pedal.
Tremec, the supplier behind the six-speed manual used in GM performance models including the Blackwing sedans and the Camaro, has produced a development car to address that interest. The vehicle is a Peitz Performance C8 race car fitted with Tremec’s manual transaxle. Tremec invited a journalist and several potential customers to sample it at Motorsports Gateway, a new private track outside Howell, Michigan.
A one-off track car, not a showroom special
The C8 is a dedicated track build. Its interior is stripped, a roll cage and harness are fitted, and the manual selector emerges from the console area normally used for storage and the automatic gear selector. The driving position is fixed and suited to a taller driver; a 5-foot-7 reviewer found the pedals hard to reach and heel-and-toe work awkward. The test took place on a green track on a November afternoon in Michigan, so the circumstances did not encourage pushing the one-off car to its limit.
The swap fits with limited surgery
Peitz did not have to remake the car around the gearbox. The tunnel was cut to accommodate clutch-pedal hardware, but the manual transaxle occupies the same space as the stock dual-clutch unit and does not require bespoke mating hardware. The pedal box also has enough room for a clutch pedal; even with three pedals, the footwell is described as roomier than that of a previous-generation Camaro.
Remote shifter changes the character
The transaxle layout brings a compromise in shifter feel. Because the selector is mounted remotely, cables run rearward to the gearbox rather than connecting directly to the transmission as they do in front-engine cars using the TR-6060. The result is less precise and less “snick-snick” than the front-engine version, and it is less notchy. That may appeal to drivers who want smoother shifts, while others may miss the more mechanical feel. Moving the engine forward or the shifter rearward would address the issue, but either change would alter the C8’s layout.
Cost remains the big obstacle
The conversion is technically plausible, but it is not cheap. Tremec says the gearbox alone costs about $75,000. Combined with the price of a Corvette, a manual C8 build would rival a showroom-spec Z06. Tremec expects the price to fall as volume rises, and it says OEMs are interested—not necessarily, or exclusively, General Motors. Other automakers have reportedly sought a high-torque manual transaxle, though no customers were named. For now, the manual C8 remains a compelling engineering demonstration rather than an accessible option.
