Instruments & Meters

SinceVision launches wide-spot laser sensor for rough-surface displacement measurement

The SGI-N030W combines an expanded laser spot with dual-sensor synchronisation for micrometre-level inline measurement in battery, semiconductor and precision-assembly applications.

Nadia BelmonteNovember 17, 20265 min read2 views

A wide-spot laser sensor arrangement measures a moving electrode foil between two opposing sensor heads on a precision gantry.

SinceVision has introduced the SGI-N030W, a wide-spot laser displacement sensor aimed at high-speed, non-contact dimensional measurement on rough, textured and irregular surfaces. The sensor uses an expanded laser spot and optical triangulation, a configuration the company says is intended to reduce the instability that conventional point-spot laser systems can encounter when surface finish varies.

The product extends SinceVision’s SGI Series and is positioned for lithium-ion battery manufacturing, semiconductor processing and precision mechanical engineering, where micrometre-level measurement is required. Conventional point-spot sensors concentrate reflected laser energy on a small area, so microscopic scratches, grain boundaries, brushed textures and matte finishes can produce signal variations that are interpreted as dimensional changes. SinceVision says such effects can lead to false defect warnings and additional inspection.

The SGI-N030W instead collects reflected light across a broader surface area. According to the company, this averages localised microscopic peaks and valleys before signal conversion, reducing the influence of surface roughness and optical scattering. The approach is intended to provide more stable displacement measurements on materials such as drawn metals, sandblasted surfaces and coated battery foils.

Measurement specifications

SinceVision specifies a 30 mm reference distance and a ±5 mm measurement range. On a diffuse white target under static conditions, the sensor is rated for 0.05 µm repeatability, with linearity of ±0.02% of full scale across the range. A 50 kHz sampling frequency, equivalent to a 20 µs update interval, is intended to support high-speed measurement and monitoring of dynamic processes.

Communication options include RS485, 100Base-TX Ethernet and switchable analogue outputs for 4–20 mA current or 0–10 V voltage signals. Master-slave synchronisation allows two sensors to operate in opposition, measuring from either side of a component or moving material.

Battery electrode thickness

One of the main applications identified by SinceVision is inline thickness measurement of lithium-ion battery electrodes. Coating thickness and uniformity affect energy density, internal resistance and long-term cell stability. The company notes that offline inspection with contact micrometers or drop indicators can introduce operator variability and may deform wet or uncured electrode materials, while periodic spot checks cannot provide continuous coverage across a production reel.

In the proposed arrangement, two synchronised sensors sit above and below a moving electrode web. Mounted on a calibrated, low-thermal-expansion marble gantry, the opposing heads measure their respective clearances to the material. A system controller combines those readings with the fixed mounting datum to calculate absolute electrode thickness in real time.

According to SinceVision, production trials demonstrated stable, repeatable thickness measurement within ±0.3 µm at a web speed of 300 mm/s. The company says the 50 kHz sampling frequency provides high longitudinal resolution, allowing localised coating agglomerations, edge thinning and exposed substrate areas to be detected before the material reaches cell winding.

Semiconductor and assembly uses

The sensor is also intended for semiconductor manufacturing, where non-contact measurement matters for sensitive wafer surfaces. Potential uses include wafer position verification, edge detection, height measurement and checks on wafer seating and chuck alignment in atmospheric transfer modules and vacuum load-lock systems.

In precision assembly, SinceVision says the device can monitor the movement of voice coil motors, linear actuators and micro-steppers. Its sampling rate is intended to capture transient displacement, mechanical oscillations, settling behaviour and end-stop overshoot across the measurement range. Position data can be sent to machine control systems over Ethernet for real-time monitoring and process control.

Surface-related errors

Jack Li, global sales and marketing director at SinceVision, says false defect warnings caused by surface texture remain a recurring challenge in battery manufacturing and precision assembly. He explains that conventional point-beam laser sensors can interpret microscopic scratches and rough coatings as actual thickness variations, slowing production lines and creating a need for manual inspection. The SGI-N030W’s expanded spot is designed to average out these surface-related variations, while synchronisation between opposing heads supports high-speed thickness verification.