KraussMaffei Extrusion has developed a continuous single-stage process for PVC roofing membranes that replaces the conventional two-stage route built around a separate heating-cooling-mixing combination. The process, called PVC InlineMixing, is designed to lower manufacturing costs, shorten production time and support a faster return on investment, the company says.
In the traditional route, PVC powder, plasticizers, additives and fillers are processed batchwise in a hot-cold mixer to make a dryblend. After cooling and intermediate storage, the mixture is plasticized in a twin-screw extruder and formed into membranes. PVC InlineMixing instead feeds all solid and liquid components directly into the extruder through gravimetric dosing systems, in the required proportions and on a continuous basis.
Lower energy and operating costs
Because the separate mixing stage is eliminated, manufacturers do not need to invest in a standalone heating-cooling-mixing combination. The material is heated only once. KraussMaffei says energy consumption and costs can fall by up to 75%, depending on formulation, system parameters and location. The company also cites lower space requirements and labor costs, as well as reduced maintenance spending because wear parts for the heating-cooling mixer are no longer needed. Lower capital expenditure and operating costs together are presented as the basis for a quicker payback.
Formulation changes during operation
The continuous design is also intended to improve production flexibility. Formula adjustments and color changes can be made directly during operation through the integrated control system, according to the company. That removes the need to prepare and store separate dryblend batches before a change. KraussMaffei says the process requires significantly fewer staff than a system using dry-blend premixing.
Christopher Bartel, Head of Sales Flat & Foam at KraussMaffei Extrusion, said the process offers manufacturers lower production costs, greater flexibility and more efficient manufacturing. He added that producers can respond more quickly to new requirements, adjust formulations during production and reduce energy and capital expenditure.
Tests and reference line
The process was developed at the KraussMaffei Extrusion Technology Center in Laatzen and validated with industrial roofing-membrane formulations. The trials used a co-rotating twin-screw extruder from the ZE 65 BluePower series, equipped with loss-in-weight feeders for all solid components and multiple liquid feeders for free-flowing formulation ingredients. The ZE BluePower series has a Da/Di ratio of 1.65; the company says the combination of high torque and large free volume provides a wide process window for different formulations.
KraussMaffei reports that the tests confirmed high gelation levels for the PVC and high product quality. The mechanical properties and weldability of the membranes also met industrial requirements across several formulations, according to the company. Bartel said the results demonstrate the potential of PVC InlineMixing for industrial roofing-membrane production, and that the Technology Center works with customers to test their formulations under production-relevant conditions, optimize the process and prepare for industrial implementation.
PVC InlineMixing is already in use on an industrial production line for PVC roofing membranes. The reference plant reaches a total throughput of 1,800 kg/h with two extruders and two calenders. In that setup, PVC, additives and fillers, along with the resulting edge trimmings, are processed continuously into finished membranes. KraussMaffei presents the line as an example of combining product quality with a leaner, more flexible and more cost-effective production process.
